For the top, I cut all the rounded edges off all the 2x4s for the topand cut dadoes every 6" in one of the boards for dog holes. After Iglued the boards together, I flattened the top with a jack plane and a4 foot straight edge.Things Id change:- A recessed tool tray for catching wayward tools would have been nice.- A better vice.- I store other bench top tools under the bench, and have found thestretchers are too high for some of the tools Id like to store.- Id get the top flattened properly.********Dave HigginsHeres the work bench I built last winter its built with constuction grade lumber everythig is laminated together nothing bigger than a 2x6 was used. The inlay work is my first attempt, and is made with peruvian walnut.
*******Charl Du PlessisThis is my Frankenstein work bench made from wood I salvaged from and old pergola and a deck! It is enormous, 3 meters by 1 meter by 1 meter!! This allows me to have my scrollsaws, bench grinder, and drill press all mounted to it and still have plenty of room on the other side to use as the "bench" part of my workbench without sacrificing alot of the surrounding area in my garage! The side without the tools mounted to it will be getting an MDF top put on it soon to eliminate the gaps between the decking timbers.It certainly isnt pretty but it definitely serves the purpose. But best of all it cost me a bag of screws!!
*******
Trevor ScottHeres my bench. Built from leftover 4x2 from the garage reroof. Woodwork vice at one end, engineers vice at the other. Its 9 long so plenty of space for my drill and scroll saw. Slatted mid section gives me plenty of storage for tools, boxes etc. I need to squeeze a midi lathe in this week but that may have to free stand!
*******
John Short
Here is what I use. Its simply 3 2x12s glued up and sitting on a metal table in the back yard by my shed. dimensions are 3x6. Its all I can do without a real shop.
*******
Tony ODriscollThis is my pride and joy. 300 pounds plus of Maple with a laminated MDF top. Front and end vices. I only wish I included a traditional shoulder vice rather than the large end end vice. Im very glad I didnt include a tool well. I dont need it. Its 7 by 36".*******Trevor ScottHeres my bench. Built from leftover 4x2 from the garage reroof. Woodwork vice at one end, engineers vice at the other. Its 9 long so plenty of space for my drill and scroll saw. Slatted mid section gives me plenty of storage for tools, boxes etc. I need to squeeze a midi lathe in this week but that may have to free stand!
*******
Mere Minutes:
0 komentar:
Posting Komentar